Aerial TV - DVB-T receiver

Aerial TV is an offline receiver for DVB-T and DVB-T2 signals via a USB tuner. You don't need data plan or WiFi connection. Aerial TV works by picking up local digital signals off the air with a regular antenna. It supports MPEG2, MPEG4 and HD reception where available and offers EPG functionality.

You will need a low cost USB tuner hardware. You can grab one online for less than €10. Make sure to get an rtl-sdr RTL2832 tuner. When it arrives, just connect the provided antenna and start receiving. You may need a USB OTG cable to plug the tuner in your Android device. USB OTG cables are inexpensive and easy to find.

Aerial TV allows you to try all features for free during the 30 minute trial period. After the trial period ends, you can make a one-off purchase to lift the time restrictions.

Note that your Android device must support USB OTG. If unsure, do a quick search online or consult your Android device manual. Also check that there is DVB-T/DVB-T2 signal in your local area by doing a quick search online. DVB-T2 reception is only supported with compatible R828D dongles. Signal needs to be strong enough for Aerial TV to pick it up. For best results use an outdoor aerial.

Please note: Aerial TV is the software part of DVB-T/DVB-T2 hardware receiving equipment and does not bundle or provide any content. Aerial TV does not work without an attached USB hardware. Signal is provided by the end user via a USB hardware tuner so Aerial TV cannot guarantee reception.

Legal notice: By using Aerial TV you agree to comply with all relevant laws, including but not limited to holding valid licenses, regarding reception and viewing of DVB-T/DVB-T2 signals applicable to your local area and country. Aerial TV expects the end user to provide content privately meaning Aerial TV and the development team cannot be held responsible or liable for misuse by end user. Aerial TV cannot be used for playing back copyrighted content. Please refer to the terms and conditions you have received with the purchase of your hardware receiver for more information.

Aerial TV needs a third party driver in order to communicate with USB hardware. Aerial TV does not bundle any driver software. USB hardware support is dependent on the third party DVB-T driver app installed by the end user.

Using open source third party drivers in conjunction with Aerial TV, the following devices can be supported:

- RTL-SDR devices (RTL2832 and RTL2832U)

- Astrometa DVB-T2

- Unbranded Android DVB-T dongles (AF9035 based)

- ASUS My Cinema-U3100Mini Plus V2

- Compro VideoMate U620F and U650F

- Crypto ReDi PC 50 A

- Dexatek DK DVB-T Dongle

- Dexatek DK mini DVB-T Dongle

- DigitalNow Quad DVB-T Receiver

- EVOLVEO XtraTV stick

- G-Tek Electronics Group Lifeview LV5TDLX DVB-T

- GIGABYTE U7300

- Genius TVGo DVB-T03

- GoTView MasterHD 3

- Leadtek WinFast DTV Dongle mini

- Leadtek WinFast DTV2000DS Plus

- Leadtek Winfast DTV Dongle Mini D

- MSI DIGIVOX Micro HD

- MaxMedia HU394-T

- PCTV AndroiDTV (78e)

- Peak DVB-T USB

- Sveon STV20, STV21 and STV27

- TURBO-X Pure TV Tuner DTT-2000

- TerraTec Cinergy T Stick/+ (Black, RC Rev. 3)

- TerraTec NOXON DAB Stick (rev 1, 2 and 3)

- Trekstor DVB-T Stick Terres 2.0

Experimental support *

- MyGica Pad TV Tuner PT360

- MyGica T230 DVB-T/T2/C

- MyGica (Geniatech) T230C DVB-T/T2/C

* Experimental support: The original app that comes with the dongles interferes with Aerial TV. If you want to use these dongles you need to uninstall or disable the original app.

天线电视是经由USB调谐器，用于DVB-T和DVB-T2信号的离线接收器。你不需要数据计划或WiFi连接。空中电视的工作原理是用一个常规的天线拿起本地数字信号停播。它支持MPEG2，MPEG4和高清接待处，并提供配备EPG功能。

您将需要一个低成本的USB调谐器硬件。你可以抓住一个在线不到10€。一定要得到一个RTL-SDR RTL2832调谐器。当它到达，只需连接所提供的天线，并开始接收。您可能需要一个USB OTG线缆堵塞调谐器Android设备。 USB OTG线缆价格便宜，很容易找到。

空中电视，您可以尝试在30分钟的试用期内免费的所有功能。试用期结束后，你可以一次性购买解除时间限制。

请注意，您的Android设备必须支持USB OTG。如果不确定的话，做一个快速的搜索在线或咨询您的Android设备使用手册。同时检查是否有通过网上做一个快速搜索你所在区域的DVB-T / DVB-T2信号。 DVB-T2接收仅兼容R828D加密狗支持。信号需要足够强大的航空电视把它捡起来。为了达到最佳效果，请使用室外天线。

请注意：空中电视的DVB-T / DVB-T2的硬件设备接收软件部分和未捆绑或提供的任何内容。空中电视不无连接的USB硬件。信号是由最终用户通过USB硬件调谐器设置成空中电视不能保证接收。

法律声明：使用空中电视您同意遵守所有相关法律，包括但不限于持有有效的许可证，有关接待和适用于本地区域和国家的DVB-T / DVB-T2信号的观看。空中电视预计最终用户提供内容的私人空中意义电视和开发团队可以不承担责任或承担由最终用户的误操作。航空电视不能用于播放版权内容。请参考您与您购买的硬件接收器的更多信息，收到的条款和条件。

空中电视时才能与USB硬件进行通信的第三方驱动程序。空中电视不捆绑任何驱动软件。 USB硬件支持是依赖于最终用户安装了第三方DVB-T驱动程序的应用程序。

与空中的电视一起使用开源的第三方驱动程序，以下设备可以支持：

- RTL-SDR设备（RTL2832和RTL2832U）

- Astrometa DVB-T2

- 无品牌的Android DVB-T加密狗（AF9035基于）

- 华硕我的电影，U3100Mini加V2

- 康博启视录U620F和U650F

- 加密REDI PC 50一

- Dexatek DK DVB-T适配器

- Dexatek DK迷你DVB-T适配器

- DigitalNow四DVB-T接收器

- EVOLVEO XtraTV棒

- G-Tek公司电子集团】朗视LV5TDLX DVB-T

- 技嘉U7300

- 天才TVGo DVB-T03

- GoTView MasterHD 3

- 丽台WinFast DTV加密狗迷你

- 丽台WinFast DTV2000DS加

- 丽台WinFast DTV加密狗迷你d

- 微星DIGIVOX微HD

- MaxMedia HU394-T

- PCTV AndroiDTV（78E）

- 峰值DVB-T USB

- Sveon STV20，STV21和STV27

- TURBO-X纯粹的电视调谐器DTT-2000

- 配备了TerraTec CiergyŤ棒/ +（黑色，RC第3版）

- 的TerraTec NOXON DAB棒（REV 1，2和3）

- Trekstor DVB-T棒特莱斯2.0

实验支持*

- MyGica垫电视调谐器PT360

- MyGica T230 DVB-T / T2 / C

- MyGica（金亚太）T230C DVB-T / T2 / C

*实验支持：自带的软件狗的原始应用与空中电视干扰。如果你想利用这些加密狗您需要卸载或禁用原始应用。